Section 3: Z-Axis Installation¶
Parts and Tools Required¶
| QTY | Part/Description | Packaged In |
|---|---|---|
| 1 | CRP840-00-200 - PRO Linear Ballscrew Axis | Z Axis |
| 1 | CRP934-00-XX-FAST | CRP900-00-HW-XXXX |
| (8) M8 x 25mm Flat Head Screw | ||
| 1 | Motor & Bumper Hardware | CRP900-00-HW-XXXX |
| (1) Bumper Adapter Bushing | ||
| (1) Aluminum Spacer | ||
| (1) Recess Bumper | ||
| (1) M5 x 30mm Socket Head Cap Screw |
- Required Tools:
- 3mm Allen Wrench
- 4mm Allen Wrench
- 5mm Allen Wrench
- Small Phillips Screwdriver (PH1)
3.1 Z-Axis Installation¶
3.1.1¶
- Attach the Z axis bumper to the motor mount plate.
3.1.2¶
- Attach the Z axis Brake Connector to the motor mount plate.
- Orient the brake connector with the alignment tab (inset image) toward the front of the Z axis.
- Do not overtighten the screws.
3.1.3¶
- Secure the brake wire slack using the M3 Flat Head Machine Screw to lightly pinch the wires.
3.1.4¶
- Remove the moving plate from the Z axis.
3.1.5¶
- Remove the metal dust cover screws from the Z axis and set them aside.
3.1.6¶
- Remove the metal dust covers from the Z-Axis.
3.1.7¶
- Install the M8 Flat Head Screws to secure the Z axis.
3.1.8¶
- Tighten the indicated bolts.
3.1.9¶
- Slide the metal dust covers back on the Z axis as indicated.
3.1.10¶
- Attach the metal dust covers using the screws removed in previous steps.
3.1.11¶
- Attach the moving plate to the Z axis using the screws removed in previous steps.